WTB: 3wt rod, 8' or shorter
WTB: 3wt rod, 8' or shorter
G'day guys,
What do you have in the way of spare, unloved 3wt rods floating around? I'm after something to chase herring, gars and mullet, and maybe some trout/reddies on the dams. It's meant to be a bit of fun, so I don't want to outlay huge sums on a rod: thus the "used" market seems the best bet for me.
Cheers,
Graeme
What do you have in the way of spare, unloved 3wt rods floating around? I'm after something to chase herring, gars and mullet, and maybe some trout/reddies on the dams. It's meant to be a bit of fun, so I don't want to outlay huge sums on a rod: thus the "used" market seems the best bet for me.
Cheers,
Graeme
IFFF Certified Casting Instructor
-
- Posts: 54
- Joined: Wed Mar 28, 2012 5:09 pm
Re: WTB: 3wt rod, 8' or shorter
Hi Graeme,
One of the problems with 3#s is that they are not designed for saltwater, so the reelseat and lock-up rings ussually start corroding quite badly.
I built my own salt water three weight on a generic blank using a saltwater reelseat and stainless snake eyes. I am using a small bar-stock alluminium reel on it with nothing (non-anodised alliminium, brass, copper and or steel) that can corrode, in it.
For a line I used a Rio slik shooter as a shooting line and 6m-10m heads from old lines - floating, intermediate and two sinkers - as shooting heads. It works quite well and I use it most of the time on the Swan and at Mandurrah. If you are going to use shooting heads on it, I would recommend you look for a rod with a fast action rather than a slow action soft presenter. The fast action and the shooting heads will also help you in windy conditions. Get a second spool for a full length floating line for fresh water purposes.
Hope it helps.
Sam
One of the problems with 3#s is that they are not designed for saltwater, so the reelseat and lock-up rings ussually start corroding quite badly.
I built my own salt water three weight on a generic blank using a saltwater reelseat and stainless snake eyes. I am using a small bar-stock alluminium reel on it with nothing (non-anodised alliminium, brass, copper and or steel) that can corrode, in it.
For a line I used a Rio slik shooter as a shooting line and 6m-10m heads from old lines - floating, intermediate and two sinkers - as shooting heads. It works quite well and I use it most of the time on the Swan and at Mandurrah. If you are going to use shooting heads on it, I would recommend you look for a rod with a fast action rather than a slow action soft presenter. The fast action and the shooting heads will also help you in windy conditions. Get a second spool for a full length floating line for fresh water purposes.
Hope it helps.
Sam
Re: WTB: 3wt rod, 8' or shorter
Thanks Sam.
I was looking into getting a TFO BVK 3wt (to match the 5, 7 and 9 wts I have) since they have salt-resistant components, but the sticker shock this time round was a bit much. The local distributors have upped the price again, so a rod costing about $200 in the US now costs over $300 here. Good thing we have a favourable exchange rate, eh?
If I end up with a used one, I'll be spraying the reel seat with Inox after every trip. However, I do like the idea of building my own rods and might end up down that route anyway if a used one doesn't show up. It won't be much cheaper than the BVK, but it will be my own work.
I'll probably end up with two reels: one for floating line and one for intermediate. A shooting head system in a 3wt doesn't apeal to me in the same way it does on the heavier rods I've got. I want a delicate presentation from this setup.
Cheers,
Graeme
I was looking into getting a TFO BVK 3wt (to match the 5, 7 and 9 wts I have) since they have salt-resistant components, but the sticker shock this time round was a bit much. The local distributors have upped the price again, so a rod costing about $200 in the US now costs over $300 here. Good thing we have a favourable exchange rate, eh?

If I end up with a used one, I'll be spraying the reel seat with Inox after every trip. However, I do like the idea of building my own rods and might end up down that route anyway if a used one doesn't show up. It won't be much cheaper than the BVK, but it will be my own work.
I'll probably end up with two reels: one for floating line and one for intermediate. A shooting head system in a 3wt doesn't apeal to me in the same way it does on the heavier rods I've got. I want a delicate presentation from this setup.
Cheers,
Graeme
IFFF Certified Casting Instructor
-
- Posts: 207
- Joined: Mon Mar 19, 2012 11:38 am
Re: WTB: 3wt rod, 8' or shorter
Graeme,
you can get BVks from the states for $224 delivered! cause I almost bought a 3wt the other day as a 2nd bream rod for summer! but decided I needed to invest in a decent vise first so thats my next purchase a 3wt rod!
you can get BVks from the states for $224 delivered! cause I almost bought a 3wt the other day as a 2nd bream rod for summer! but decided I needed to invest in a decent vise first so thats my next purchase a 3wt rod!
-
- Posts: 54
- Joined: Wed Mar 28, 2012 5:09 pm
Re: WTB: 3wt rod, 8' or shorter
Graeme,
You can get a rod kit for a 3#, 7'6" to 9', from Mudhole for less than $120 + postage. Or you can get blanks (7'6" - 9') from $80 to $90, plus a handle for $21, reel seat for ±$15 and a set of guides for ±$10 - 15.
Sam
You can get a rod kit for a 3#, 7'6" to 9', from Mudhole for less than $120 + postage. Or you can get blanks (7'6" - 9') from $80 to $90, plus a handle for $21, reel seat for ±$15 and a set of guides for ±$10 - 15.
Sam
Re: WTB: 3wt rod, 8' or shorter
Ooooh! I like that idea. I'll look into it now. Thanks very much Sam.Sam de Beer wrote:Graeme,
You can get a rod kit for a 3#, 7'6" to 9', from Mudhole for less than $120 + postage. ....
Sam
Cheers,
Graeme
IFFF Certified Casting Instructor
Re: WTB: 3wt rod, 8' or shorter
Got my 3wt now. Just a cheapy IM8 9' rod to see me through, but at $50, I'm a happy choppy.
Cheers,
Graeme
Cheers,
Graeme
IFFF Certified Casting Instructor
Re: WTB: 3wt rod, 8' or shorter
Just to set the record straight, the price of the BVK series has remained unchanged since being introduced to Australia, (at $310 FOR THE FRESHWATER MODELS UP TO 6WT ), so if you add gst, import duty and shipping to that U.S price , it does not look that far out of the ball park, and Saltwater flyrodder members get 10% discount which would make it $279 with Australian Warranty. Anyway, glad you found a 3wt at the right price graeme, there are some cracker herring ( big for herring anyway ) at point reso at the moment, and better, there's hardly any snot weed there so far this year.
Last edited by Rohan on Mon Oct 22, 2012 2:47 pm, edited 1 time in total.
Re: WTB: 3wt rod, 8' or shorter
Do you have 7wt for me Rohan?Rohan wrote:Just to set the record straight, the price of the BVK series has remained unchanged since being introduced to Australia, at $310 , so if you add gst, import duty and shipping to that U.S price , it does not look that far out of the ball park, and Saltwater flyrodder members get 10% discount which would make it $279 with Australian Warranty. Anyway, glad you found a 3wt at the right price graeme, there are some cracker herring ( big for herring anyway ) at point reso at the moment, and better, there's hardly any snot weed there so far this year.
Re: WTB: 3wt rod, 8' or shorter
Hi Rudi,
I have modified my last post , was specifically talking about the 3wt pricing but my wording was not clear. We have a 7 here, sorry didn't return your call but the guys wrote down the wrong phone number.
I have modified my last post , was specifically talking about the 3wt pricing but my wording was not clear. We have a 7 here, sorry didn't return your call but the guys wrote down the wrong phone number.
